Ridgid is the number one name in press tools the first choice of professionals who demand reliable performance and maximum productivity.

Their latest innovation is built to impress.

The Ridgid RP 340B press tool weighs in at just 8.3 pounds with battery attached.

The RP 340 is 17% lighter and 30% smaller than its predecessor the RP 330B.

However, it does offer the same power output of 7,200 pounds of force and an extended service cycle of up to 42,000 press cycles between scheduled tool maintenance.

That’s 30% percent longer, giving you more uptime on the job, more bang for your buck in time and saved dollars.

With its compact size and powerful punch, the RP 340B press tool is the industry’s lightest pistol grip press tool on the market today.

The max size pipe this baby can press up to is 4 inches and it also uses Ridgids standard series jaws, ring kits and its accessories allowing you to make more connections on more materials and more sizes than any other press tool on the market today.

The RP 340 press tool by Ridgid is designed to press copper, stainless steel or 2-inch PEX including RIDGID ProPress, MegaPress, Pureflow, XL-C, and Press Snap.

For pressing copper and stainless steel fittings from half-inch to two-inch use Ridgid standard jaws and rings for Propress.

For black iron pipe and schedules of 5 through to 40 and sizes from 1/2″ to 2-inch fittings use jaws and rings for MegaPress.

For larger connections from two and a half-inch to 4-inch use the XL-C press rings for copper and stainless steel fittings or the XL press rings for bronze fitting.

The press rings also provide greater access to connections in extremely tight places. Once connected the patented ball tip actuator jaw achieved an additional one hundred and eighty degrees of rotation.

Beyond pressing applications, the RP 340 is capable of cutting one and a half to four-inch no Hub and surface wait soil pipe with the press snap soil pipe cutter.

The RP 340 is powered by the advanced lithium battery platform rigid employs for its entire press tool line.

A corded AC power adapter is also available.

With a full charge, the Ridgid RP 340 B press tool can deliver more than 400 presses allowing you to work quickly and maximize productivity.

Indicators alert you when the tool’s battery is low, when it’s operating outside acceptable temperatures or when it needs service.

Industry-exclusive, the bolt sensor technology ensures the jaw is securely connected to the tool before the press cycle is initiated to confirm a good consistent press every time.

The tool also incorporates an internal microprocessor that monitors performance through cycle completion.

And of course, the RP 340 is backed by the lifetime warranty that is standard on every rigid press tool. Not only that you also get 24/7 product and field support.

Just a small part of the legendary reliability you get from Ridgid products.

In ultimate productivity the all-new RP 340 lets you take on even the toughest jobs with confidence.

Overall

Ridgid is a household name among the plumbing industry to provide and deliver tuff tools and machines. The RP340 press tool lives up to its standards for quality and performance.

Who gives a lifetime warranty on a product if it’s not going to last or perform?

These tools have certainly changed the way and are the future. Propress can be used for commercial, industrial and residential applications.

And since it works on coppers, plastic, s/steel, and steel, for a water system, gas, and heating systems.

If you don’t move with the times as this is a game-changer, you’ll be struggling to compete, pricing wise without the use of these tools.

I’ve been plumbing for nearly 30 years and seen a lot of changes in the industry and this is another one of those love/hate changes.

Now, it’s your turn

If you don’t want to be left behind in the industry the time is now. When you order your press tool today you be getting the keys too:

• More job completions in quicker times resulting in more revenue.
• Fewer tools to buy, no need for copper expanders, benders, oxy
• Save on the headaches of organizing hot works permits as well as possible insurance costs.

That’s right, this tool alone will allow you to be more competitive to others who are not converting leaving them fighting over the scraps… is that where you want to be?

And another reason why you should order right now is you are 100% safe to try it out for free.

All I am saying is try the press system out for 30 days to see if you like the tool, the idea and if it suits your plumbing style of works. If it does, you’ll be as happy as a pig in shit, which I think will exactly what will happen.

If for some strange reason your not a fan of the B press stool or system, the way it helps speed things up, how effortless it is to fix that burst pipe without the need to drain the entire water lines… then simple return using the refund policy on Amazon.com – and you’ll get your money back.

Decision Time

You have a choice to make: Do what you’ve been doing (or worse, do nothing at all).

You know where that will lead. No money, No jobs, No business. Is that really where you want to go?

Take a new action, and get a new result. Make more money, land more jobs, pay off the debt, go on that well overdue holiday.

Here’s what to do now, just click on the button below to grab your new ridgid rp 340 press tool crimping tool now at the best price online today…

Today I am going to give you a quick overview of the Milwaukee 2432 22 M12 12V Propex Expansion Tool Kit.

Choosing the wrong expander can be costly, wasting your money and precious time on the job. In this article, I will be going over the features, prices, pros and cons and everything I can think of regarding this Milwaukee PEX expander.

Before we get right into this review and see how the Milwaukee 2432 12v expansion tool stacks up against the competition I’m about to explain that.

But first I want to give you a bit of a background on me so you know that I know what I’m on about.

So like I said my name is Jack and I’ve been a licensed plumber now for just short of 30 years and over that time I’ve tied out my fair share of different tools and brands.

I also want to add that my main line of cordless handtools these days are Dewalt. I’ve been using them for quite a while and I am more than happy with them.

Milwaukee 2432 22 M12 12V Propex Expansion Tool Kit

what we will cover in this review is the following:

• Features
• Pros and cons
• What you get in the kit
• Customer reviews
• Price
• Final thoughts

The Milwaukee 2432 22 M12 12V is ideally made for working in tight spaces and roof space areas. The 90-degree right angle design makes it so easy to install piping in the tight areas.

Even tho its compact it still weighs in at over 10 pounds, but that is because it’s built with real metal running gears and an integrated metal body frame.

Making it almost industrial proof and job site durability. Compact but not light as compared to others, but it’s still manageable to use one-handed and the longer trigger system helps the cause.

The tool is designed with an auto-rotating head for fast installation and to give you a better more evenness expansion making the join better fit.

On a single charge, the 12v expander will around 130 1/2″ connections per charge. This number will go down as when an increase in pipe size.

I also like how the tool has an LED light on the butt of the tool giving you light when working in those tightly enclosed areas like roof spaces.

You can also check the life of the battery with its battery fuel gauge with just a press of a button.

The tool has a hanging bracket but is only mounted on the one side so not universal, and there is no belt clip. I guess you could use the hanging bracket at a pinch.

What you get

When you order your kit today, the kit consists of two batteries, charger, 3 expansion heads 1/2″, 3/4″ and 1″ heads, the tool all in a heavy-duty sturdy Milwaukee plastic case to keep it all together and in the one place.

Almost forgot, they also include a free bottle of grease when you purchase the kit.

Customer Reviews

Looking at the customer reviews left on Amazon.com you’ll find that the Milwaukee 2432 22 M12 12V Propex Expansion Tool is very popular. At the time of writing, there are 96% of the reviews that are either 4 or 5 stars rated.

The tool has an impressive overall 4.8-star average and tells you the truth I’m finding it hard to find a downside. I may be picky but one of the cons is that it doesn’t have a belt clip.

To do 3/8″ pipe you will have to purchase the head as an extra.

Price

When you order your Milwaukee 2432 22 M12 12V Propex Expansion Tool Kit today the price does move around so for best, just click on the button below to get the latest pricing and any special offers that are available at the current time.

Conclusion

The Milwaukee M12 expander tool is a great kit if you are a Milwaukee fan. Build tuff for tradies I can say it will go the rounds. I like the fact that it’s all-metal geared and casing but that does make it heavier over its competitors.

It’s quick, punchy and pulls a great expand every time.

When you order your Milwaukee M12 expander kit today you’ll be getting

• A heavy-duty tuff as nails PEX expander made for the tradie
• A faster better way to join pipe
• Quicker rough-ins or repairs making you more money in less time
• Backed by Milwaukee’s 5-year guarantee

And it all is part of the kit when you order yours today.

Try it out for 30 days is all I am suggesting. If you order through the button below you are 100% safe to try it out and if your not happy with the performance, or how much faster o the speed it has given you just send it back – and you will get your money back.

Here’s what to do now… just click on the button below and grab your new expander today…

We will tell you everything you need to know about the Dewalt 20v PEX expander tool kit to help you to decide if this is the best tool for you and will satisfy all your PEX piping needs.

If you have already done your own research on it and just want to buy, feel free to just click on the button below to get the best pricing and shipping from Amazon.com today…

Dewalt has been in the tool making industry since way back in 1922 when Raymond DeWalt, then superintendent of Seabrook Farms, perfects the first woodworking machine for the purpose of increasing productivity and versatility.

Today their 20v cordless range is interchangeable with over 100 different skins from cordless rotary hammer drill, saws, cordless hedge trimmers, and plumbing tools.

In 2013 Dewalt announces that it finally started producing its products in the United States and now has 7 manufacturing facilities throughout the US.

In this post, we are going to only be looking at the PEX expander tool, its pros, and cons, reviews and pricing.

DEWALT DCE400D2 20V Max 1 Pex Expander Tool Kit

The Dewalt dce400d2 20v max 1 pex expander tool kit is designed for the tradesman, its the fastest pex expander on the market today in 2020 compared to other competitive pex expanders.

The Dewalt dce400d2 20v max 1 pex expander tool kit can expand pipe from 3/8 to 1″ and with its automatic rotating head your guaranteed to ensure you get a perfect and even expansion every single time.

The full-length trigger makes its ideal for getting into those tight spaces or when at full arms reach and just need that extra bit.

The tool itself has a dual-sided hanging hook if you are one of those clean freaks who have to have everything in order and in its own hanging position, this will suit you to a T.

The rubber grip over-mold grip is standard on all Dewalt hand tools and helps prevent vibrations through the tool ain into the hands making it much comfortable for longer use.

If you are pulling an all-nighter or got short strawed for the burst pipe in the roof space the Dewalt dce400b has its very own little LED light on the base of the tool.

It’s a pretty cool feature and you really don’t take much notice of it until you like really need it.

The tool does come with its own belt clip making it easier to carry around when on site. Altho the tool does way 5 pounds by the time add the battery, it is a bit of weight hanging off your side all day.

The tool comes in both full kit, with two 20v batteries, charger the tool and 3 expander heads, 1/2″, 3/4″ and 1″, PEX expander grease and case. You can see it all here Dewalt dce400d2 20v max 1 pex expander tool kit

Or

If you are just needing the skin as you are already a Dewalt fan, then all you need is the Dewalt DCE400B. You get the same as the kit apart from the batteries and charger.

And also you can use the tool with Uponor/wirsbo as well as with PEX.

What others are saying about Dewalt dce400d2 20v max 1 pex expander tool kit

From the customer reviews left on Amazon.com you will find the tool has an almost 5-star rating. They are all saying how easy the tool is to use and love the awesome battery life.

They also love there is plenty of power and that you can the batteries across their full range of 20v skins and tools.

Finally, it’s your turn

When you order your Dewalt dce400d2 20v max 1 pex expander tool kit you will be getting

• The fastest PEX expander tool on the market today
• A tool made in the United States.
• A battery system that is usable among over 100 different tools
• Backed by Dewalt’s 3-year
• And a full kit that will do your most standard piping sizes

You can see why Dewalt dce400d2 20v max 1 pex expander tool kit is the perfect choice for you.

Just click on the link below and grabs your today and while you are there, grab yourself a brand new set of IWISS PEX Pipe Cutters to go with your new expanders.

DIY Plumbing Tips And Tools For The HomeOwner

It never hurts to have some idea about using basic hand tools for doing those basic plumbing repairs and odd jobs around the house. Here is a basic diy plumbing guide with tips for tools for the homeowner that you should consider having for basic plumbing work and doing those basic odd jobs around the house. Things like replacing a shower head or even replacing a prt valve on the old hotty the list is endless.

Basic Plumbing Tools

The basic set of tools that any plumber or in that way any hand man, diy person should have in there tool box will be the list below. While you won’t be able to do all those plumbing jobs they will allow you to do quite a few tho.

• Adjustable shifter or spanner: I recommend to have 2. One 10″ and other 12″.Just makes easier for bigger nuts
•  adjustable vice grips:Ideal for holding pipe or fitting while doing up a nut or tightening up a flex hose
• Plumbers tape:this is also known as “teflon tape”,always good to have a roll in your toolbox. Teflon tape is great for ensuring a good seal on threaded pipes like when replacing showerheads. See how to put the tape on correct way to
• pliers:multiple of uses from holding small copper pipe to removing tap washers out of breach when doing a tap washer change

• Caulk and caulk gun/silicon gun:There are plenty of reasons why you keep caulk around the house from repairing joins in shower to fixing that leaking gutter even the misses vase you break

These tools will cover many basic projects. If you think you need more then go for it. Can never have enough tools in the box. Other to think about maybe a hammer, different types of screw drivers and maybe a cordless drill. Depending what job is at hand can always buy the tools when needed

Tools For Copper Piping

Soldering pipes can be a little tricky but it’s a fairly easy process if you have the right tools and understand the principles. Soldering copper is easy it’s when mixing with other materials like brass where it gets real tricky. As outlined in the video above some of the tools you might need if doing bit of copper work include:

• Copper Tube cutters
• Propane torch
• Fitting brush or emery paper
• Flux (and brushes)
• Solder
• Copper fittings

Working With Galvanised Pipe

Your house mite have old school galvanised pipes as a part of your plumbing system. Galvanised pipes were popular and are usually connected with threaded fittings. Most of these threaded fittings are starting to get very weak and start to leak so repairs are a often thing.

Recent repairs or new renovations done more recently might have copper pipes joined to galvanised (which creates problems down the road due to the reactions between the metals.) Galvanised pipes tend to have corrosion and build-up inside the lines, and while it doesn’t hurt to consider replacing galvanised pipe with more recent material there cold be a big cost in doing so.

As always, the tools you need will depend on the particular project you’d like to complete but this is a guide on basic diy plumbing tips and tools for the homeowner.

We will also point you in the right direction where we would recommend purchasing from so you get the right hammer drill that you will love and that will do the job and make you happy

Before we get into the DEWALT Bare-Tool DC212B 18-Volt 7/8-Inch Cordless SDS Hammer drill review, you may be here and NOT looking to read a full review, you may just want to buy this dewalt rotary hammer drill if that is the case you can click on the link below to go straight to amazon right now

Click here to check out the DEWALT Bare-Tool DC212B 18-Volt 7/8-Inch Cordless SDS Hammer...

If you are still here and you haven’t quite decided on buying this awesome Dewalt rotary hammer drill let us take a closer look.

Features For DEWALT Bare-Tool DC212B 18-Volt 7/8-Inch Cordless SDS Hammer drill

• Compact L-Shape Design allows access in tight spaces while providing optimal balance for the user
• Shocks- active vibration control signifcantly reduces vibration and increases user comfort and productivity
• 1.7 ft-lbs impact energy provides corded power without the cord
• Variable speed, reversing switch delivers versatility in all applications
• Factory-set clutch reduces sudden, high torque reactions if bit jams Electro-pneumatic hammer mechanism for fast penetration and low vibration

Whether your old sds rotary hammer drill has worn out OR simply just looking for a later model you will find the DEWALT Bare-Tool DC212B 18-Volt 7/8-Inch Cordless SDS Hammer is the perfect solution. 

These very compact L Shaped design looking drills are perfect in size. This new design allows these new drills access to tight spaces but keeping up with dewalts style of being hard, tuff but in saying that is a very well balanced drill to use.

Built into the hammer drill is active vibration control shocks that significantly reduces vibrations through the drill and into the arms therefore reducing fatigue and makes it more comfortable to use

With a massive 1.7 ft-lbs of impact drive you can easily think you using a corded dewalt hammer drill and not a dewalt cordless rotary hammer drill

The DEWALT Bare-Tool DC212B 18-Volt 7/8-Inch Cordless SDS Hammer drill has a decent look and feel about it and will always be up for the long run and for those harder jobs this drill makes them look easy

With having variable speed and a handy forward and reverse switch on the pistol grip makes flicking from forward to reverse with just 1 finger without even needing to look for the switch

This little beauty even has a factory-set clutch built-in that help and reduces sudden grabs that other wise could have hurt the wrists with high torque reactions if bit does jam.

Using the latest electro-pneumatic technologyon the hammer mechanism for fast penetration drilling and low vibration

This DEWALT tool is backed by three-year limited warranty covering any defects due to faulty materials or workmanship (from the date of purchase). It’s also covered by DEWALT’s two-year free service contract, where DEWALT will maintain the tool and replace worn parts caused by normal use–for free and also has a 90 day money back guarantee

Light in weight at only 5.8 pounds and measuring 10.5 inches front to back these compact little drills pack a hard punch tho

If you are looking for a great 18v cordless rotary hammer drill we think you have found it!

Check it out at Amazon.com below:

DEWALT Bare-Tool DC212B 18-Volt 7/8-Inch Cordless SDS Hammer at Amazon.com...

Customer Opinions about the dewalt cordless rotary hammer drill

Now comes the ultimate test about DEWALT Bare-Tool DC212B 18-Volt 7/8-Inch Cordless SDS Hammer drill!

What are people saying that have purchased?

The reviews of the DEWALT Bare-Tool DC212B 18-Volt 7/8-Inch Cordless SDS Hammer drill are great for the most part. You will see mostly 4 or 5 star reviews at Amazon.com which is great but there is a couple reviews that are bit less in the rating due to hard for access to the dewalt head office customer services. Due to the positive feed back and reviews this dril is a fantastic choice.

Who Is The  DEWALT Bare-Tool DC212B 18-Volt 7/8-Inch Cordless SDS Hammer drill For?

If you are looking for a non expensive easy to operate and ans simple cordless rotary hammer drill that packs a punch you need to take a serious look at the DEWALT Bare-Tool DC212B 18-Volt 7/8-Inch Cordless SDS Hammer drill . You will save money , get a fantastic drill that will last and do the hardest of jobs and you will get a VERY low cost for this product.

Check it out through the link below:

>>Click here to check out the  DEWALT Bare-Tool DC212B 18-Volt 7/8-Inch Cordless SDS Hammer drill at Amazon.com…

At the moment you can pick this up for just $218.01 and that will save you $245.83 off the price right at the minute. What others have brought at same time when buying the drill is DEWALT DW5470 5-Piece Rock Carbide SDS Plus Hammer Bit Set

Check it out today it is our top choice and is an awesome Dewalt hammer drill for the tradie or DIYer

As a trade plumber and roofer for over 20 years, I only use two brands of snips.

Wiss and Gilbow. You want quality at a reasonable price then they are it.

Aviation tin snips are also what Wiss snips often are called so don’t be confused same tin snips in shape and style just maybe different brand as well.

Crescent Wiss Snips Color Handle System Guide

When buying Crescent Wiss snips you’ll notice they have different color handle grips. Red, yellow and green.

This color is a code to tell you which way the snips will cut. Below I will explain the differences and types you can get

Crescent Wiss Red Handle Snips

Crescent Wiss Red handle snips are a left cut snip.

They are ideal for cutting around left tight curves and cutting straight.

What I mean by the left cut is with each cut the metal as you are looking at the snips left-hand side curls up as you close the jaws to enable you to keep cutting.

They are designed to cut light gauge low carbon cold rolled steel.

Very accurate, precisely and easily does it.

With non-slip serrated jaws made from molybdenum steel and a compound lever action, they deliver extra power when you need it most.

They also feature a safety latch for added protection.

• Non-slip serrated jaws are made of wear-resistant molybdenum steel
• Provides extra service demanded by the compound lever action
• Self-opening action for fast, effortless feed
• Vibrant red handles for easy identification

Crescent Wiss Green Handle Snips

Crescent Wiss Green handle snips have yep you guessed it opposite to the reds they have a right cut.

They are ideal for cutting around right tight curves and cutting straight.

What I mean by the right cut is with each cut of the metal as you are looking at the snips the right-hand side lifts up as you close the jaws to enable you to keep cutting.

They are designed to cut light gauge low carbon cold rolled steel.

Very accurate, precisely and easily does it.

With non-slip serrated jaws made from molybdenum steel and a compound lever action, they deliver extra power when you need it most. They also feature a safety latch for added protection.

• Non-slip serrated jaws are made of wear-resistant molybdenum steel
• Provides extra service demanded by the compound lever action
• Self-opening action for fast, effortless feed
• Vibrant green handles for easy identification

Yellow Handle: 

The Crescent Wiss yellow handle snips are made to cut straight or can be used for slight curves and corners.

Wiss Aviation Compound Action Tin Snips are designed to cut low carbon cold rolled steel precisely and easily.

With non-slip serrated jaws made from molybdenum steel and a compound lever action, they deliver extra power when you need it most.

For added protection, these snips also feature a safety latch.

• Cuts straight left or right in light stock
• Non-slip serrated jaws are made of wear-resistant molybdenum steel
• Provides extra service demanded by the compound lever action
• Self-opening action for fast, effortless feed
• Vibrant yellow handles for easy identification

Most plumbers have red and greens but not really needing the yellows as when we want to cut straight it’s in long lengths so this is where the Gilbows coming into it.

Aviation snips are good for trimming and cutting out little sections, not for long straight cuts due to there small jaw size.

Irwin Gilbow G245 Straight Tinsnip

Crafted from drop forged carbon steel Gilbow tin snips feature a non-slip joint set and safety stops to prevent trapped fingers, making them great general-purpose snips.

• Drop forged carbon steel handles and blades.
• Double hollow ground blades reduce friction for easier cutting.
• The unique non-slip joint set and tested for a perfect cut.

These tin snips come straight cut as in the picture and able to buy them to cut either right or left just like the Wiss snips do.

There dearer to buy as there bigger. A person who does roofing and metal ducting work will require these snips for doing those long straight cuts.

Conclusion

As you can see there are a few different types and brands of tin snips on the market and I have covered only a few different 1’s.

There are bulldog snips, left and right offset snips, curved blades snips just keeps going and going.

For the plumber these are the main snips you need to have in your tool kit are red and green handle Wiss snips and a straight cut Gilbow snips for those long cuts.

Another good thing about Wiss snips and can get new springs if need be.

One little thing with Wiss aviation snips is that over time when using the nut tightens ups where the jaws are.

Just loosen off when does it a common thing with them.

There is a wide range of hammers available on the market these days You walk into the hardware store find the hammer section and here they all are on the wall. Now the question becomes which hammer to buy. They vary in shape, size and weight. The different styles reflect different uses.

The shape of Hammer heads has not changed much over the years although some modern materials are now used in both the head and handle. Traditionally handles were made of wood which went through a hole in the head and wedges where used in the end of the handle to stop the head fall off when in use. This method allowed the handle to be easily replaced if required. Most modern hammers have the handles built into the head making it all one piece and often with some form of built-in shock absorber to make them easier to use. Below is a few different styles and brands to help you out with what to buy as a plumber or the diyer

Claw Hammer

The most popular hammer for general work. If you are going to buy a hammer this will be your go to in the plumbing trade. Available with a wooden, fiberglass or steel handle. Wooden handles don’t normal come with a rubber grip like the fiberglass and steel handles do. They come in a few different weights and the  most popular weights are 455-680g (16 to 24oz). The heavier the hammer the hard the your blow or strike is when making contact also more effort to swing as well. The claw is normally curved and incorporates a ‘V’ shape to draw nails from timber and be used to lever up floorboards or where other places where a lever is required. Care must be taken especially with cheaper models as the force applied can easily weaken the joint between the handle and the head.

Club Hammer Or Mash Hammer

Sometimes called a mash hammer or club hammer they are little brother to the sledge hammer. They have a double faced head and is useful for light demolition work. Can be used for driving steel chisels and masonry nails or knocking out a brick or two. As debris is likely to fly always recommend the wearing of safety glasses and hearing protection is recommended. Weight 1135g (2 1/2 lb) being best suited to domestic work. Handles are normally much the same as a claw hammer where can get them in wood, fiberglass or steel.

Sledge Hammer

Used for the heavier jobs such as driving in steel stakes for boxing when doing concreting or breaking up concrete to gain access below where the pipes are in the ground. Very handy for knocking down bricks or have a stubborn pole that may need little help to move as well. The list is endless for what sledge hammer can do.  For lighter jobs just the weight of the head may be used for small soft  blow’s but for heavier work the sledge hammer is swung like an axe. Always wear suitable protective clothing including safety glasses. Weights 7, 10 and 14 lb.

Most 2 Popular Hammer Brands To Look At When Buying

Estwing Hammer:

 Estwing’s Solid Steel Claw Hammers provide unsurpassed balance and temper. The head and handle are forged in one piece. Have a huge range from standard nail hammer up to sledge hammers and beyond. Click here to see what others are saying about it

• One piece drop forged steel
• Unsurpassed finish and balance
• Genuine original leather or rubber grip handles

Stanley Hammer: 

The Stanley Fatmax hammer has a jacketed graphite core which adds strength and durability in the handle while providing the ‘feel of wood’. The high-carbon, polished steel head is precision balanced. The rim temper reduces incidences of chipping or spalling. The ribbed grip allows air to cool hand and channels sweat away. Patented head-to-handle assembly. Click here for more info and what others are saying

• High-carbon, polished steel head is precision balanced
• Jacketed graphite core
• Ribbed grip
• Large strike face
• Flared grip end helps to prevent hammer from slipping out of user’s hand

As you can see there is littery heaps and heaps of non knowing brands and styles. Best thing is to buy the best hammer you can afford at the time. It’s personnel preference weight and shape of you hammer as long as it does the job in a safe ad correct manner there will never be any problem .

Advice for using hammers

Always use the right hammer for the job, it will make the job easier and may avoid possible damage to the hammer/workpiece.

When assembling delicate work, use a piece of scrap wood between the work piece and the head of the hammer. This will prevent damage to the workpiece.

Where the handle is held in the hammer head by steel wedges, check regularly to ensure the wedges are tight. Timber handle can shrink in dry conditions.

If a timber handle does start become loose, place the head in water overnight, the water will cause the handle to expand and tighten in the head.

If a hammer tends to slip off nails over time wax builds up on the head. Roughen the face of the head using some sandpaper or rub it on some concrete.

Always wear safety glasses when breaking up concrete and other materials that can shatter.

Look after you hand tools and they will last a life time. If you looking for some info about best  tin snips check this out here for more info